Doosan Infracore D18NAP — Procedure of Disassembling an Engine

6. About the engine 33. Remove the valve spring. 35. Remove the crankshaft pulley. D C A B A B EDL013031A EDL013033A 1) Remove the calipers (D). 1) Loosen the flange hex bolt (B). 2) Compress the valve with the valve spring 2) Remove the crankshaft pulley (A). 3) Remove the valve cotters (C). compression tool (EF.120-262). CAUTION 4) Remove the valve spring retainers (B). Be careful not to damage the oil seal. 5) Remove the valve springs (A). 34. Remove the valves. 36. Remove the oil pan. A A B B EDL013032A EDL013034A 1) Remove the valves (B). 1) Loosen 22 flange hex bolts (B). 2) Remove the valve stem seals (A). 2) Remove the oil pan (A). 6 - 15