Doosan Infracore D18NAP — Procedure of Assembling Engine

6. About the engine 13. Attach the oil suction pipe and oil delivery pipe. B C A D B A EDL013034A EDL013035A 1) Attach 3 O-rings (A). 11 7 6 10 22 2 3 2) Attach the oil suction pipe and the oil delivery pipe 3) Tighten 2 hex bolts (C) at a tightening torque of (B). 21 12 1.0 ± 0.3 kgf m. 20 13 4) Tighten 3 hex bolts (D) at a tightening torque of 19 14 2.2 ± 0.3 kgf m. CAUTION 18 15 Ensure that the O-rings of the inlet and the outlet have been mounted. 17 9 5 1 4 8 16 Be careful not to damage the O-rings while mounting them. EDL013055A 1) Apply LOCTITE 5902 to the oil pan assembly surface(C) with the diameter of ш 3 ± 0.5 mm. 14. Attach the oil pan.

CAUTION C Keep clean liquid gasket dispensing surface. Dispensing line should not be snapped. 2) Attach the oil pan (A). CAUTION Be careful that the oil pan has been attached in the right direction. Assemble oil pan in 5 minutes after dispensing liquid gasket. Do not pressurize inside oil pan in 25 minutes after dispensing liquid gasket. 3) Tighten 22 flange hex bolts (B) at a tightening torque of 2.2 kgf m. EDL013054A 6 - 30