Doosan Infracore D18NAP — Procedure of Assembling Engine

6. About the engine Be careful to note the direction when connecting the fuel return hose. The injector should be fully connected with the hose. CAUTION 2) Attah the hose clips (B). Do not allow the gasket to protrude from or be to one side of the water pump. Be careful not to damage the gasket while mounting it. CAUTION Fix the handle of hose clip to face the front of the engine. 25. Attach the water pump pulley. 3) Tighten the fixing bolt (C). A B 27. Attach the glow plug. D C A B EDL013023A 1) Attach the water pump pulley (A). 2) Tighten 4 flange hex bolts (B) at a tightening torque of 2.2 kgf m.

EDL013021A 1) Tightening 3 glow plugs (A) to the cylinder head at a tightening torque of 9~12 N m. 2) Attach the electric connector (B). 26. Connect the fuel return hose. B 3) Attach 3 washers (C). 4) Tighten 3 hex nuts (D) at a tightening torque of 2.5~3 N m. A C 28. Attach the heat screen. B C B A EDL013022A 1) Press the fuel return hose (A) into the end of the nipple and connect it. CAUTION EDL013020A 6 - 35