Doosan Infracore D18NAP — Procedure of Assembling Engine

6. About the engine 33. Attach the front llifting hook. CAUTION After mounting the hose clamps, make the protrusion face the cylinder head side to prevent interference between the protrusion and the water pump pulley. Do not use the hose clamps more than twice; replace them with new ones. 32. Attach the EGR cooler assembly and the cam A position sensor. B A EDL013014A 1) Attach the front lifting hook(A). B 2) Tighten 3 flange hex bolts(B) at a tightening torque C of 2.2 kgf m. E 34. Attach the rear lifting hook. D 1 EDL013015A 1) Attach the EGR cooler assembly(A). CAUTION Be careful to note the direction when mounting the EGR cooler.

A B 2) Tighten 3 flange hex bolts(B) at a tightening torque 3) Connect the rubber hoses(C) of 3.1 kgf m. 4) Attach the cam position sensor(D). EDL013012A 5) Tighten the fixing bolt(E). 2 A B EDL013013A 1) Attach the rear lifting hook(A). 6 - 37