6. About the engine 2) Tighten 2 flange hex bolts (B) at a tightening 37. Attach the oil filter assembly. torque of 4.4 kgf m. 35. Attach the knock sensors. D A C A B B EDL01300 9 A 1) Attach the 3 O-rings and the oil filter assembly (A). EDL013011A 2) Tighten 5 flange hex bolts (B). 1) Attach 2 knock sensors (A) to the cylinder block. 2) Tighten 2 fixing bolts (B). 3) Connect the coolant hose (C) 4) Tighten the fixing bolt (D). CAUTION 36. Attach the intake manifold. Make sure that the O-rings have been mounted. Be careful not to damage the O-rings while mounting them. B 38. Attach the turbocharger. C 1 A A B D EDL013010A 1) Attach the gasket and the intake manifold (A).
C E CAUTION Be careful to note the direction when mounting the gasket. Be careful not to damage the gasket while mounting it. EDL013007A 2) Tighten 8 flange hex bolts (B) at a tightening torque of 2.2 kgf m. 3) Attach the boost temperature sensor (C). 6 - 38