6. About the engine 1) Attach the common rail (A) to the intake manifold. 2 CAUTION Be careful to note the direction when attching the common rail. Be careful not to damage the common rail while attaching it. A B 2) Temporarily tighten 2 collared hex bolts (B) by C hand. D 3) Temporarily connect the fuel injection pipes (C) and (D) by hand. EDL013008A . CAUTION 1) Attach the gasket and the turbocharger(A). Do not bend the fuel injection pipes by force. Be careful to note the direction when connecting the fuel injection pipes.
Assemble the nut on one side of the fuel injection pipe first, and then the nut on the other side to connect the round part of the pipe to the correspondent part correctly. Do not reuse fuel injection pipes but replace them with new ones. Reusing fuel injection pipes may allow foreign substances into the fuel pipes or oil leaks from the bolt clamping to occur, causing a critical fault in engine performance. 2) Tighten 4 flange hex bolts (B) at a tightening torque of 2.2 kgf•m. 3) Connect the oil delivery pipe (C). 4) Tighten 2 hollow screws from the oil delivery pipe at a tightening torque of 2.0 kgf•m. Note) Tighten the fixing bolt (D) if the engine is TYPE-1.
5) Connect the oil return pipe. Note) The oil return pipe is that TYPE-1 is (E) and TYPE-2 is (D). 4) Tighten 2 collared hex bolts(B) at a tightening CAUTION 5) Tighten the fuel injection pipes (C) and (D) at a torque of 2.2 kgf•m. Be careful to note the direction when connecting the hose and gasket. Be careful not to damage the gasket while mounting it. Do not reuse the hose clamps but replace them with new ones. Do not reuse the oil delivery pipe but replace it with new one. tightening torque of 3.0 kgf•m. 6) Tighten the fixing bolt (E). 40. Attach the intake stake. C 39. Attach the common rail and the injection pipe. D C A A B B E D EDL013005A 1) Attach the gasket and the intake stake(A).
EDL013006A 6 - 39