Doosan Infracore D18NAP — Water pump Assembly

7. Cooling System Water pump Assembly 3. Attach the V-belt. 1. Attach the water pump. 4. Inject coolant. B A 1) Open the radiator cap and add coolant. WARNING C Use coolant recommended. D EDL013024A 1) Align the gasket(A) with 2 stud bolts and attach it. 2) Align the water pump (B) with 2 stud bolts and Note) To replace stud bolts, apply LOCTITE 272 to the stud bolts and then press in those bolts. attach it. 3) Tighten 4 hex bolts (C) and 2 flange hex nuts (D) at a tightening torque of 2.2 kgf m CAUTION Do not allow the gasket to protrude from or be to one side of the water pump. Be careful not to damage the gasket while mounting it. 2. Attach the water pump pulley.

A B EDL013023A 1) Attach the water pump pulley (A). 2) Tighten 4 flange hex bolts (B) at a tightening torque of 2.2 kgf m. 7 - 7