9. Fuel System 3. Remove the glow plug. 5. Remove the right and left cylinder head cover. C A D A B B C D EDL013021A EDL013025A 1) Loosen 3 hex nuts (D) and remove 3 washers (C). 1) Loosen 8 flange hex bolts (D). 2) Remove the electric connector (B) and 3 glow 2) Remove the right cylinder head cover (C). plugs (A). 3) Loosen 10 flange hex bolts (B). 4) Remove the left cylinder head cover (A). 4. Remove the fuel return hose. B 6. Remove the injectors. A B C D B C A EDL013022A 1) Loosen the flange hex bolts (C). EDL013026A 2) Remove the hose clips and disconnect the fuel 1) Loosen 3 hex bolts (D). 2) Remove 3 injector fixtures (C). hose (A). 3) Remove 4 injectors (B).
4) Remove 3 injector seal ring washers (D). CAUTION Do not reuse the head cover rubber seal and the injector oil seal but replace with new ones. Be careful not to damage the injector oil seal of the cylinder head cover. Remove it by turning the injector slowly from left to right. 9 - 8