9. Fuel System 2. Attach the right and left cylinder head cover. CAUTION A Fix the handle of hose clip to face the front of the engine. B C 3) Tighten the fixing bolt (C). D 4. Attach the glow plug. D C A B EDL013025A 1) Attach the left cylinder head cover(A). 2) Tighten 10 flange hex bolts (B) at a tightening 3) Attach the right cylinder head cover (C). torque of 1.0 kgf m. 4) Tighten 8 flange hex bolts (D) at a tightening torque of 1.0 kgf m. EDL013021A 3. Connect the fuel return hose. 1) Tightening 3 glow plugs (A) to the cylinder head at a tightening torque of 9~12 N m. 2) Attach the electric connector (B). B 3) Attach 3 washers (C).
4) Tighten 3 hex nuts (D) at a tightening torque of 2.5~3 N m. A C 5. Attach the common rail and the injection pipe. B C A B EDL013022A E 1) Press the fuel return hose (A) into the end of the nipple and connect it. D CAUTION Be careful to note the direction when connecting the fuel return hose. The injector should be fully connected with the hose. EDL013006A 1) Attach the common rail(A) to the intake manifold. 2) Attah the hose clips (B). 9 - 10