Doosan Infracore D18NAP — Injector Assembly

9. Fuel System CAUTION 2 Be careful to note the direction when attching the common rail. Be careful not to damage the common rail while attaching it. A 2) Temporarily tighten 2 collared hex bolts(B) by hand. 3) Temporarily connect the fuel injection pipes(C) and (D) by hand. . CAUTION Do not bend the fuel injection pipes by force. Be careful to note the direction when connecting the fuel injection pipes. Assemble the nut on one side of the fuel injection pipe first, and then the nut on the other side to connect the round part of the pipe to the correspondent part correctly. Do not reuse fuel injection pipes but replace them with new ones.

Reusing fuel injection pipes may allow foreign substances into the fuel pipes or oil leaks from the bolt clamping to occur, causing a critical fault in engine performance. EDL013002A 1) Attach the breather hose(A). CAUTION Do not reuse the clamps but replace with new ones. 4) Tighten 2 collared hex bolts(B) at a tightening 5) Tighten the fuel injection pipes(C) and (D) at a torque of 2.2 kgf•m. tightening torque of 3.0 kgf•m. 6) Tighten the fixing bolt(E). 6. Attach the breather hose. 1 A EDL013001A 9 - 11