Doosan Infracore D18NAP — General Information

9. Fuel System Common Rail The high-pressure fuel generated from the fuel high- pressure pump is stored in the common rail. When a driver operates the vehicle, fuel injection timing and optimum fuel amount are decided based on the data set in the Electronic Control Unit (ECU) and the solenoid valve of the injector installed in each engine cylinder is operated to inject fuel into the cylinder. General Information Doosan's common rail fuel injection system separates the high-pressure apparatus from the fuel injection apparatus. The ECU decides the fuel amount and the fuel injection timing and pressure for the optimum performance and injects fuel in the cylinder.

7 6 3 4 8 9 5 2 11 10 1 EDL013073A 1. Fuel Tank 5. Fuel injection pump 9. Injector 2. Fuel Filter 6. Common Rail 10. Fuel return hose 3. Fuel hose 7. Fuel injection pipe 11. Return fuel hose of fuel injection pipe 4. VENTURI 8. Injector Fuel Return Hose Main components of the common rail fuel injection system are as follows. 1. Electronic Control Unit (ECU) 1) The Electronic Control Unit (ECU) receives the input signals generated by the above input sensors based on the driver's accelerator operation and works immediately according to the driving performance of the engine and the vehicle.

In addition, based on the above information, the ECU generates open/close circuit - circulation circuit operations of the vehicle and engine. 2) The engine speed is measured by the crankshaft RPM sensor and the ignition order is determined by the camshaft RPM sensor. Through electrical signals generated by the potentiometer of the accelerator pedal sensor, shows how strong the driver has pressed the pedal. In addition, the ECU includes the turbocharger and the intake pressure sensor. The intake pressure sensor measures the intake pressure. 3) When it is very cold or the engine is cooled, the ECU receives data from the coolant temperature 9 - 12