10. Intake/Exhaust System continuously runs without oil pressure in the Turbocharger Disassembly turbocharger. Therefore, no oil film is created on 1. Remove the breather hose. the center bearings and the journal bearings of the turbocharger, causing bearing, wearing out and 1 shortening of the turbocharger lifetime. 4) If an engine is not operated for a long period during cold weather or in areas with cold climate, operate the engine at idle after starting the engine until the engine oil pressure is normal. A 5) The turbocharger turbine spins at high speed of bearings may determine the turbocharger lifetime. 50,000 ~ 200,000 rpm .
Therefore, lubrication of Please use only recommended genuine engine oil 6) Prolonged usage of contaminated air cleaner may and check and replace the engine oil periodically. cause a critical damage of the turbocharger. EDL013001A Regularly check and replace the air cleaner. 2 7) A turbocharger is a very complex and precise part. Only certified and skilled technicians should work on it. A 8) If a turbocharger is operated without intake and exhaust pipe, serious human injury may occur and critical faults of the engine performance may occur. Please operate a turbocharger only when all of parts are exactly mounted on the specified position.
9) Do not lift up a turbocharger by grabbing the actuator. The actuator may be damaged because 10) The weight of a turbocharger is about 4.0 kg or of the weight of the turbocharger. EDL013002A more. To lift up a turbocharger for installing or 1) Remove the breather hose (A). removing it, the worker should lower the center of CAUTION gravity or press his body close to the turbocharger. Otherwise, worker may drop the turbocharger, Do not reuse the clamps but replace with new ones. causing damage of the part and injury. 10 - 14