Doosan Infracore D18NAP — Assembly of Timing Gear Case

11. Cylinder block/head Timing gear case Detaching timing gear case Assembly of Timing Gear Case 1. Remove the V-belt. 1. Attach the timing gear case (A). 2. Remove the crankshaft pulley. A E B A EDL013052A EDL013033A 1) Loosen the flange hex bolt (B). 2) Remove the crankshaft pulley (A). CAUTION Be careful not to damage the oil seal. 3. Remove the timing gear case. F A EDL013053A B A D E C EDL013037A B 1) Loosen the fixing bolt (D). 2) Remove the crank speed sensor (C). 3) Loosen 16 hex bolts (B). 4) Remove the timing gear case (A). D E C CAUTION EDL013037A Do not reuse the oil seal; replace them with new ones. 1) Make the assembly surface of the timing gear case face the ground. 11 - 7