11. Cylinder block/head 5. Remove the injectors. 6. Remove the cylinder head cover. A B D B C A EDL013026A EDL013027A 1) Loosen 3 hex bolts (D). 2) Remove 3 injector fixtures (C). 1) Loosen 10 hex bolts (B). 2) Remove the cylinder head cover (A). 3) Remove 4 injectors (B). 4) Remove 3 injector seal ring washers (D). 7. Remove the rocker arm. CAUTION Do not reuse the head cover rubber seal and the injector oil seal but replace with new ones. Be careful not to damage the injector oil seal of the cylinder head cover. Remove it by turning the injector slowly from left to right. B A CAUTION Do not reuse the injector seal ring washers.
Reuse of the injector seal ring washers may cause critical damage to the engine due to unstable combustion. EDL013028A 1) Loosen 8 flange hex bolts (B). 2) Remove the rocker arm (A). 11 - 30