Doosan Infracore D18NAP — Measurement of Gap of Piston Ring End

13. Others/Driving System Piston Disassembly of Piston Measurement of Inside Diameter of Piston Pin Bore 1. Set the gauge. Note)Refer to Chapter 6 (Procedure of Disassembling an Engine) . 1. Detach the piston. 2. Measure the inside diameter of the piston pin bore. Measurement of Outside Diameter of Piston Pin B A D C 1. Set the gauge. 2. Measure the outside diameter of the piston pin. E F EDL022133A D C B A 1) Measure total 8 points of the inside diameter of the piston pin bore: A, B, C, D, vertical (E), and horizontal (F). 2) Measure all of 3 piston pin bores. 3) The standard measurement value of the inside diameter of the piston pin bore is within the range of 31.008 ~ 31.014 mm.

EDL022132A 1) Measure total 8 points of the outside diameter of the piston pin: A, B, C, D, vertical (E), and horizontal (F). 2) Measure all of 3 piston pins. 3) The standard measurement value of the outside diameter of the piston pin is within the range of 30.995 ~ 31 mm. 1. Measure the gap of the piston ring end. Measurement of Gap of Piston Ring End A EDL013100A 13 - 11 Item Specified Value Piston pin of the pisto Inside diameter of bor n 31.008 ~ 31.014 mm e Item Specified Value Piston pin outside diameter 30.995 ~ 31 mm