. OPERATION OPERATION CHECK BEFORE STARTING CHECK COOLANT LEVEL, ADD COOLANT WARNING 3 - 71 Always pe rform the procedures in this section before starting the Do not o pen the radiator cap unless nec essary. When checking the coolant, always wait for the eng ine to cool down and c heck the sub tank. Immedia tely after the engine is stopped , the coolant is at a high temperature and the radiator is un der high internal pressure. If the ca p is removed to check the cool ant level in this condition, there is a hazard of burns. Wai t for the temperature to go down, th en turn the cap slowly to relea se the pressure and remove it c arefully. 1.
Open the engine hood and check that the coolant in subtank marks. (1) is between the FULL and LOW 2. If the l evel is LOW, remove cap (2 ) and add the engine coolant up to t he FULL mark. 3. If ther e is no coolant in the subta nk, add water to the radiator throug h water filler (3) at the top of the radiator, then add water to the 4. Check 5. After adding coolant, tighten the c 6. If mor leaka