Komatsu — STARTING ENGINE

. OPERATION OPERATION OPERATION OPERATION temperature. The turbocharger rotates at extremely high speed. Immediately after the engine is started, the pressure of the lubricating oil has not risen sufficiently, so if the engine speed is suddenly raised, it may lead to damage or seizure of the turbocharger bearing. The turbo protect function acts to prevent this problem. It uses electronic control to prevent the engine speed from rising above a certain speed for the first few seconds after the engine started. To improve the ease of starting in cold weather, the low idling speed becomes slightly higher for the time given below and the engine sound is different.

In addition, it functions to make the acceleration gradual during this time. 3 - 83 5. When the e ngine st arts, rel ease the k ey in starting switch (1). The key wil l return automatically to th e ON position REMARK If th e engine do es not st art, turn the key in starting switc h (1) to the OFF position, th en turn it back to the ON p osition. The p re-heating wil l automatica water 6. I mmediatel y after st arting th e engine, run at idling c ontinuously for 15 seconds. Do not operate the accelerator pedal durin g this tim e. time e: 15 seconds or more ng engine after changing engine oil and replacing engine oil filter: 20 seconds Guideline f or idling Cold tem peratur e:

15 se conds or m When fir st starti ng engin e after cha nging engine oil and replacing engine oil filte r: 20 seconds REMARK Immediately after th e engine is started otect function is actuated. Eve n if the a ccelerator peda depressed, t he engi ne spee d will not ri se above 1,0 00 rpm . Engine water temperature Turbo protect time above 10°C (50°F) 0 sec -10°C to 10°C (14°F to 50°F) 0 to 5 sec below -10°C (14°F) 5 sec Engine water temperature Injection characteristics change time above 20°C (68°F) 0 sec 0°C to 20°C (32°F to 68°F) 0 to 6 sec -20°C to 0°C (-4°F to 32°F) 6 to 12 sec -30°C to -20°C (-22°F to -4°F) 12 to 15 sec