Komatsu — REPLACE ADDITIONAL FUEL FILTER CARTRIDGE

. MAINTENANCE SERVICE PROCEDURE REPLACE ADDITIONAL FUEL FILTER CARTRIDGE WARNING Container to catch the oil Filter wrench of the new additional fuel filter · m (1.0 kgf · m, 7.2 lbft) 4 - 49 Immediately after the engine is st opped, all parts are at high temperature, s o do not r eplace the filter i mmediately. Wait for the engine to cool down The inside of fuel piping system o f the engine is under high-pressure when the engin e is r unning.

W hen replacing the filter, wait for at least 30 seconds after t he engine stops to let the internal pressu re go dow n befo re replacin g the filte Do not bring any fire or spark clos Be careful when opening the air b leed plug at the fuel filter head and the ai r bleeder of the supply pu mp. The system is still under pressure and fuel may spur t out. NOTICE Genuine Komatsu fuel filter cartri dges use a special filter that has highly efficient fil tering ability. W hen replacing th e filter cartridge, always use a genuine K omatsu part. The common rail fuel injection sy stem used on this machine consists of m ore precis e par ts than the conventional inj ection pump and nozzle.

If any part other than a genuine K omatsu filter cartridge is used, dust or dirt may get in and cause prob lems with the inj ection system. Always avoid using subs titute parts. When carrying out inspection or m aintenance of the fuel system, pay more attention t han n ormal to th e entry of dirt. If dirt is stuck to any part, use fuel to was h it off completely. 1. Set the container to catch the cartridge. 2. Using a filter wrench, turn filt to remove it. 3. After removing the cartridge, installed to the bottom of the c cup is used again.) Install cup (2) to the bottom 4. cartridge. (When doing this, new part.) Cup tightening torque: 10 5.

Clean the filter holder, fill the coat the packing surface thin holder. NOTICE When adding fuel, do not remove small holes (A) on the dirty side. After adding fuel, remove cap (B) Always fill with clean fuel. Be care the fuel. In particular, center portio cap (B) when adding fuel. Be caref portion on the clean side.