V-belts Tensioning and changing V-belt Crankshaft − water pump − tension pulley 3 2 D Remove fixing bolts А D Remove lock-nut Б D Adjust nut В until V-belts have correct tensions D Retighten lock-nut and fixing bolts To change the V-belt, turn back the setting nut and swivel the tension pulley inwards. 1 Alternator − bottom left D Remove fixing bolts А D Remove lock-nut Б D Adjust nut В until V-belts have correct tensions D Retighten lock-nut and fixing bolts 1 1 1 2 3 1 1 1 To change the V-belt, turn back the setting nut and swivel the alternator inwards.
1 1 Alternators (55 A and 140 A) – bottom left D Loosen tightening nut on the tensioning roll D Turn mounting block (arrow) clock-wise until V-belt has correct tension D Retighten mounting nut А on tensioning pulley To change V-belt, loosen mounting nut А and turn setting screw (arrow). 1 131