Disassembling and repairing the air compressor Fig. 4 Turn the valve plate, check the intake valve (plate), and replace it if necessary. The plate must not be worn or cracked. 4 Fig. 5 Remove the side cover on the air compressor crankcase and the timing case cover. 5 Fig. 6 Unscrew the bolts of the cylinder liner, and remove the liner carefully, ensuring that the piston rings do not get damaged. Unscrew the con rod bearing cover bolts. Remove the piston and con rod. Note: Some types of 2−cylinder air com- pressors have con rods whose bearing centring −clamping sleeve in the lubrica- tion bore− is offset to the side by approxi- mately 0.5 mm.
These con rods have bearings with an off-centre bore. Be sure to use matching con rods and bearings. 6 Fig. 7 Install the counterholder, and use a special socket spanner to unscrew and remove the drive gear. 7 133