MAN Nutzfahrzeuge Aktiengesellschaft — Disassembling and repairing the air compressor

Disassembling and repairing the air compressor Fig. 8 Use an assembly iron to push out the air com- pressor crankshaft, with the counterweights facing up, and remove the rear bearing flange. Remove the inner ball bearing. 8 Assembling the air compressor Fig. 9 Drive in the rear ball bearing with a pin and hammer. Install the crankshaft. 9 Fig. 10 Install the rear bearing flange with a new O-ring using 2 uniformly tightened bolts. Make sure that the oil bores in the bearing flange and in the case align. Remove the bolts. 10 Fig. 11 Install the counterholder. Install the drive gear, and use a special socket spanner to tighten the fixing bolts to the specified torque. Remove the counterholder.

11 134