MAN Nutzfahrzeuge Aktiengesellschaft — Disassembling and repairing the air compressor

Disassembling and repairing the air compressor Fig. 12 Before installing the con rod, coat the bearing shells with a thin layer of Optimol White T paste. Position the con rod and its bearing cap on the crankshaft. Tigten the mounting bolts to the specified torque. Install the piston with the piston pin. Install the piston pin locks. 12 Fig. 13 Pistons are available in the paired sizes B, C and D, with a difference of 0.01 mm between each. The pistons and cylinders are marked as illustrated in the drawing. Only use parts with the same pairing. А The paired sizes are engraved. 1 13 Fig. 14 Install a cylinder liner with a new gasket, and tighten the bolts diagonally in pairs.

Install the side cover and timing case cover with a new gasket. 14 135