Repairing coolant pump with high-temperature and low-temperature parts Fig. 5 Knock a suitable mandrel under the cover (Fig. 2, no. 18) at the notch (arrow) and knock out the cover (destroying it). 5 Fig. 6 Pull impeller off coolant pump shaft. For this purpose four threaded bores M8 are pro- vided. 6 Fig. 7 Note: Remove bolt from low-temperature part (Fig. 1, item 5). Align water pump housing on a suitable and stable surface. Use a suitable mandrel to press the water pump shaft together with bearing out of the housing. Take off mechanical seal. The high-temperature part and the low−tempera- ture suction part are now separated.
7 Remove axial face seals and grooved ball bearing from high−temperature part if they are still in the housing. 55