Removing and installing, repairing oil pump Drain engine oil Danger: The oil is hot − risk of scalding. Do not touch the oil drain plug with bare fingers. Oil is an environmental hazard. Handle it with care! Figs. 1 and 2 With the engine at operating temperature, remove the oil drain plugs on the oil sump and the oil filter bowl and allow the old oil to drain off completely. 1 Use a vessel of sufficient size to ensure that the oil does not overflow. Caution: Used oil is dangerous waste. Observe safety regulations to prevent damage to the environment. Remove oil pan Caution: Oil pans are awkward to handle and heavy. They may contain residual amounts of engine oil.
Use lifting gear or work with a helper. 2 Fig. 3 Remove the mounting bolts from oil pan. Take off oil pan. Note: There are several possible oil pans. The picture shows a deep oil pan. 3 Removing oil pump Fig. 4 Remove the mounting bolts from the bracket and from the oil pump. Take off oil suction pipe. Measure backlash between oil pump drive gear and crankshaft gear and compare value with the nominal value. Replace worn gears. 4 65