MAN Nutzfahrzeuge Aktiengesellschaft — Removing and installing, repairing oil pump

Removing and installing, repairing oil pump Fig. 5 Remove the mounting bolts from the overpressure valve and from the oil pump. Take off overpressure valve and oil pump. The overpressure valve is encapsulated. Opening pressures see “Service Data”. Note: Depending on the engine model and oil pan variant, various oil pump versions are possible. 5 Repairing oil pump Fig. 6 Clamp oil pump in a vice (fitted with soft jaws). Remove oil pump cover. 6 Fig. 7 Pull driven oil pump gears out of the housing. Check gears and pump housing for wear (see “Service Data”). 7 Fig. 8 Remove oil pump drive gear. To do this, lay pump on suitable support and press off drive gear using a mandrel.

To install it, put drive gear on shaft, supporting facing shaft end. Press on drive gear, taking into account the speci- fied retrusion (see “Service Data”). 8 66