Removing and installing, repairing oil pump Fig. 9 Attach cover. Tighten the mounting bolts to the specified torque. Grind or exchange heavily worn covers. Checking axial play of the pump gears 9 Fig. 10 Position dial gauge and push shaft up to the stop in one direction and set dial gauge to “0”. Push shaft in opposite direction and read the movement from the dial gauge. Installing oil pump 10 Fig. 11 Tighten the mounting bolts to the specified torque.
1 2 D Before installing, check whether the oil pump run smoothly and then fit it / them free of ten- sion D Fit oil suction line А with seal in a tension-free manner D Screw on pressure-relief valve Б without seal Before mounting the oil pan, turn over the engine to check whether the crankgear and the oil pumps run unimpeded and smoothly. 11 Attaching oil pan Fig. 12 Fit a oil pan gasket. Fit oil pan to crankcase and screw in the mounting bolts. Tighten the mounting bolts to the specified torque. 12 67