Komatsu — TESTING AND ADJUSTING HYDRAULIC PRESSURE IN WORK EQUIPMENT, SWING, TRAVEL CIRCUIT

TESTING AND ADJUSTING TESTING AND ADJUSTING HYDRAULIC PRESSURE IN WORK EQUIPMENT, SWING, TRAVEL CIRCUIT 2. When main relief pressure is raised (34.8 MPa (355 kg/cm 2 )) 1) When travel is operated Measure the oil pressure when the travel is re- lieved on each side separately in H/O mode with the engine at high idling. # To relieve the travel circuit, apply the service brake. 2) When power max. function is actuated When measuring the oil pressure in G/O or H/O mode with the engine at high idling and the power max. function actuated, relieve one of the boom, arm, or bucket circuits, and measure the oil pres- sure. 20-27