TESTING AND ADJUSTING MEASURING PPC VALVE OUTPUT PRESSURE MEASURING PPC VALVE OUT- PUT PRESURE # Oil temperature when measuring 45 - 550C 1. Measuring PPC valve output pressure 1) Disconnect the hose of the circuit to be meas- ured. 2) Install adapter C3 between the hose and elbow. 3) Install oil pressure gauge C1 (5.9 MPa {60 kg/ cm2}) to adapter C3. 4) Run the engine at full throttle, operate the control lever of the circuit to be measured, and measure the oil pressure. JUDGEMENT STANDARD Minimum pressure = 2.7 MPa 26.5 kg/cm 2 . 20-35