Komatsu — ACTION TAKEN BY CONTROLLER WHEN ABNORMALITY OCCURS AND PROBLEMS ON MACHINE

TESTING AND ADJUSTING ACTION TAKEN BY CONTROLLER WHEN ABNORMALITY OCCURS AND PROBLEMS ON MACHINE 20-166 User code Service code Abnormal system Nature of abnormality - E217 Model selection input error 1. Short circuit with chassis ground, defective contact or disconnection in model selection wiring harness C17 (5) (6) (7) (13) (14) 2. Defective engine throttle, pump controller - E218 Network response overtime error 1. Disconnection, short circuit, short circuit with chassis ground in network wiring harness 2. Abnormality in engine throttle, pump controller 3. Abnormality in monitor panel - E222 Short circuit in LS-EPC solenoid system 1.

Internal short circuit, short circuit with chassis ground in LS- EPC solenoid 2. Short circuit with power source, short circuit with chassis ground in wiring harness between controller C02 (7) and solenoid C10 (1) (= end) 3. Wiring harness between controller C02 (17) and solenoid C10 (2) (- end) short circuiting with power source 4. Defective engine throttle, pump controller - E224 Disconnection in LS-EPC solenoid system 1. Internal disconnection, defective contact in LS-EPC sole- noid 2. Defective contact or disconnection in wiring harness between controller C02 (7) and solenoid C10 (1) (= end) 3.

Short circuit with chassis ground, defective contact or disconnection in wiring harness between controller C02 (17) and solenoid C10 (2) (- end) short circuiting with power source 4. Defective engine throttle, pump controller - E223 Abnormality in pump pressure sensor system 1. Internal disconnection, defective contact, short circuit, short circuit with chassis ground in pump pressure sensor 2. Short circuit, defective contact or disconnection in wiring harness between controller C03 (6) and pressure sensor C08 (2) (= end), and between C03 (16) and C08 (1) (- end) 3.

Short circuit with chassis ground, short circuit with power source, defective contact or disconnection in wiring harness between controller C03 (3) and pressure sensor C08 (3) (SIG end) 4. Defective engine throttle, pump controller