Komatsu — M- 9 When starting switch is turned ON ( engine stopped), basic check items flashes.

TESTING AND ADJUSTING TROUBLESHOOTING M-9 b) (coolant level) flashes # Check that the engine oil is at the specified level before carrying out troubleshooting. Table Chassis ground Continuity Connected Yes Disconnected No M-9 b) Related electrical circuit diagram 20-250 YES 1 Does display go out 3 YES when P05 (female) (1) is connected to Is bit (4) of chassis ground? YES monitoring code 24 • Disconnect P05 2 lighted up? • Turn starting switch Is continuity between ON NO C ch1 a6 s ( sf ie sm aa sl e sh) o(1 w6 n) a innd • Turn starting switch NO table? ON. • Set to monitoring • Turn starting switch code 24. OFF. • Disconnect C16, NO P05.

• Connect  discon- nect short connector Cause Remedy Defective engine oil level sensor system (See M-27) Defective governor, pump controller Defective monitor panel Defective contact, or disconnection in wiring harness between C16 (female) (16) - E08 (5) - P05 (female) (1). - Replace Replace Repair or replace