DISASSEMBLY AND ASSEMBLY RADIATOR - HYADRAULIC OIL COOLER REMOVAL OF RADIATOR - HYDRAULIC OIL COOLER ASSEMBLY Lower the work equipment completely to the ground and stop the engine. Then loosen the oil filler cap slowly to release the pressure inside the hydraulic tank. Remove the hydraulic tank strainer, and using tool B , stop the oil. When not using tool B , remove the drain plug, and drain the oil from the hydraulic tank and in- side the system. Hydraulic tank: Approx. 100 l . Drain engine coolant. 1. Remove engine hood, then remove counterweight top cover and control valve top cover. 2. Remove left and right stays (2). 3. Disconnect hydraulic cooler hoses (3). 30-16