Komatsu — INSTALLATION OF RADIATOR - HYDRAULIC OIL COOLER ASSEMBLY

DISASSEMBLY AND ASSEMBLY RADIATOR - HYADRAULIC OIL COOLER 4. Disconnect aeration hose (4). 5. Disconnect radiator inlet hose (5). 6. Remove fan and belt guards (6) (7). 7. Disconnect radiator outlet hose (8). 8. Sling radiator and hydraulic oil cooler assembly (9), remove 4 bottom mounting bolts, then lift off slowly. # When removing the radiator and hydraulic oil cooler assembly, be extremely careful not to dam- age the core. 2 Radiator - Hydraulic oil cooler assembly: 75 kg INSTALLATION OF RADIATOR - HYDRAULIC OIL COOLER AS- SEMBLY Carry out installation in the reverse order to removal. 1 # Check that the O-ring is not damaged or deterio- rated, then connect the hoses.

Fill with refrigerant (R-134a). 2 # Install the radiator and hydraulic oil cooler assem- bly so that there is a clearance of 13 mm or more to the left and right, and top and bottom between the fan and shroud. Refilling with water # Add water through the water filler tot the specified level. Run the engine to circulate the water through the system. Then check the water level again. Refilling with oil (hydraulic tank) # Add oil through the oil filler to the specified level. Run the engine to circulate the oil through the system. Then check the oil level again. 30-17