Komatsu — INSTALLATION OF FUEL TANK ASSEMBLY

DISASSEMBLY AND ASSEMBLY FUEL TANK REMOVAL OF FUEL TANK ASSEMBLY Disconnect the cable from the negative (-) terminal of the battery. 1. Loosen drain valve (1) of fuel tank and drain fuel. Fuel tank: Approx.250 l (when tank is full) 2. Disconnect fuel supply hose (2) and return hose (3). 3. Remove handrail (4), battery case (5), and cover (6). 4. Remove connector (7) from holder, and disconnect it. # Remove the wiring from the clamp, then discon- nect from the fuel tank. 5. If refuelling pump is fitted disconnect hose from tank tube. 6. Remove mounting bolts, and lift off fuel tank assembly (8). 1 Fuel tank assembly: 100 kg.

INSTALLATION OF FUEL TANK ASSEMBLY Carry out installation in the reverse order to removal. 1 Fuel tank mounting bolt: 276.9 ± 31.9 Nm (28.25 ± 3.25 kgm) Refilling with oil (fuel tank) Add fuel. 30-18