Komatsu — BEVEL GEAR AND PINION SET

DISASSEMBLY AND ASSEMBLY REAR AXLE BEVEL GEAR AND PINION SET Unscrew the screw (1) and the bolts (10) to dis- assemble the complete differential and be able to work on bench. Check the oil seal (8) conditions, best replace it. When reassembling, fill with grease the oil seal. Check the conditions of the bevel pinion bear- ings (2) and of the differential bearings (3); re- place them, if necessary. The operations to carry out on this group are the fol- lowing ones:

PINION POSITIONING PINION BEARINGS PRE-LOAD PINION-CROWN TEETH BACKLASH DIFFERENTIAL BEARINGS PRE-LOAD ADJUSMENT FLANGE ON PINION If you change the bevel gear and the pinion set, you have to replace the ring nut (4), the wash- ers (5) and (6) and the collapsible spacer (7). 30-65