Yamaha Exciter II-570 — Inspection and Repair

INSPECTION AND REPAIR 1 ENG 1'-1 2nd step: • Measure the piston skirt diameter lip" with a micrometer. ® 10 mm (0.4 in) from the piston bottom edge. ~ Piston size P 307-000 Standard 72.93 -72.95 mm (2.874 - 2.875 in) If out of specification, replace piston and piston rings as a set. 3rd step: • Calculate the piston-to-cylinder clearance with the following formula: Piston-to-cylinder clearance = Cylinder bore "c" - Piston skirt diameter "P" If out of specification, rebore or replace cylinder, and replace piston and piston rings as a set. ~ Piston-to-cylinder clearance: 0.070 - 0.075 mm (0.0028 - 0.0030 in) Limit: 0.1 mm (0.004 in) PISTON RINGS 1. Measure:

• Side clearance Out of specification --+ Replace piston and/ or rings. Use B' feeler gauge CD . NOTE: ______________________ ___ 307-006 Eliminate the carbon deposits from the piston ring grooves and rings before measuring the side clearance. Top 0.03 - 0.05 mm (0.001 ... 0.002 in) Side clearance 2nd 0.03 - 0.05 mm (0.001 ... 0.002 in) 5-9 http://ReadManuals.com