INSPECTION AND REPAIR ENG 1'-1 3. Measure: • Piston pin-to-piston clearance Out of specification Replace piston. Piston pin-to-piston clearance = Bore size (piston pin) ® - Outside diameter (piston pin) ® Piston pin-to piston clearance = 0.004 ... 0.020 mm (0.00016 ... 0.00079 in) CRANKSHAFT 1. Measure: • Runout Use V-blocks and a Dial Gauge (90890- 03097, YU-03097). Out of specification ~ Replace or repair. Runout limit: C' : 0.03 mm (0.012 in) C2, C3 : 0.04 mm (0.0016 in) C' : 0.05 mm (0.0020 in) ® 80 mm (3.2 in) @ 99 mm (3.9 in) 2. Measure: • Small end free play Use a dial gauge. Out of specification ~ Replace the defective parts. Small end free play: 0.8 ... 1.0 mm (0.031 ..
0.039 in) 5-11 http://ReadManuals.com