COOLING SYSTEM II~gr I ~ I • Remove the starter pulley ev. • Remove the screws @ of the starter pulley. Adjust the drive belt deflection by adding or removing a shim @. Add shim Tension becomes lower. Remove shim Tension becomes higher. Shim size 82M-15721-00 0.5 mm (0.02 in) Part number Thickness 82M-15722-00 1.0 mm (0.04 in) • Install the starter pulley and drive belt . • Recheck the drive belt deflection. If out of specification, readjust the drive belt deflec- tion. 4. Tighten: Starter pulley bolt: 23 Nm (2.3 m • kg, 17 ft • Ib) Recoil starter bolt: 10 Nm (1.0 m • kg, 7.2 ft· Ib) 2-11 http://ReadManuals.com