_____________ B_M_K_Erw~~ 4 Adjusting ratchet CD 3. Inspect: Cracks/Wear/Damage ---t Replace. • Spring ® (brake cable) Fatigue/Damage ---t Replace. • Brake pad @ thickness • Brake disk @ Bend/Cracks/Damage ---t Replace. ASSEMBLY AND INSTALLATION Reverse the "REMOVAL" and "DISASSEMBLY" procedures. Note the following points. 1. Assemble: • Caliper body Assembly steps: • Lubricate the spiral gears CD on the caliper body and lever with silicone grease . Align the projection mark ® on the leverwith the "IN" mark @ on the caliper body, screw the lever @ counterclockwise to the caliper body.
• Install the stopper pin into the holes ® on the caliper body and stationary cover, then tighten the bolts (stationary cover). ~ Bolt (stationary cover): ~ 9 Nm (0.9 m • kg, 6.5 ft Ib) • Lubricatethe one way locks 1 ® and 2 (J)with a lithium grease. • Lubricate the adjusting screw ® and back up plate ® with a silicone grease. 4·23 http://ReadManuals.com