Yamaha Exciter II-570 — Inspection and Repair

INSPECTION AND REPAIR I ENG I " I • If out of specification, replace piston and piston rings as a set. 3rd step: • Calculatethe piston-to-cylinderclearancewith the following formula: Piston-to-cylinder clearance = Cylinder bore "C" - Piston skirt diameter UP" • If out of specification, replace cylinder, and replace piston and piston rings as a set. I~ Piston-to-cylinder clearance: 0.070 .. 0.075 mm (0.0028 .. 0.0030 in) Limit: 0.1 mm (0.004 in) PISTON RINGS 1. Measure: • Side clearance Out of specification -+ Replace piston and/ or rings. Use a feeler gauge CD. NOTE:

______________________ _ Eliminate the carbon deposits from the piston ring grooves and rings before measuring the side clearance. Top 0.03 .. 0.05 mm (0.001 .. 0.002 in) I--~ Side clearance 0.03 .. 0.05 mm (0.001 .. 0.002 in) 2nd 2. Install: • Piston ring (into the cylinder) Push the ring with the piston crown. NOTE: _____________________ __ Insert the ring into the cylinder, and push it approximately 20 mm (0.8 in) into the cylinder. Push the ring with the piston crown so that the ring will be at a right angle to the cylinder bore. 5-8 http://ReadManuals.com