Yamaha Exciter II-570 — Inspection and Repair

INSPECTION AND REPAIR ~ -------------------------------------------------------- I ENGI ~. 3. Measure: • End gap Out of specification --> Replace rings as a set. Use a feeler gauge G). ® Top 0.2 - 0.4 mm (0.008 - 0.016 in) 307-027 t--~ End gap 2nd 0.2 - 0.4 mm (0.008 - 0.016 in) @ 20 mm (0.8 in) PISTON PIN ® 1. Measure: • Outside diameter @ (piston pin) Out of specification --> Replace. Outside diameter (piston pin): 20.0 - 20.005 mm (0.787 - 0.788 in) 307-018 2. Measure: • Piston pin-to-piston clearance Out of specification --> Replace piston.

Piston pin-to-piston clearance = Bore size (piston pin) @ - Outside diameter (piston pin) @ Piston pin-to-piston clearance = 0.004 - 0.020 mm (0.00016 - 0.00079 in) 5-9 http://ReadManuals.com