___________ _N_S_PE_C_T_O_N_A_N_D_R_E_~_I_RIENGI~I CRANKSHAFT 1. Measure: • Runout Use V-blocks and a Dial Gauge (90890-03097, YU-03097). Out of specification -t Replace or repair. Runout limit: C, 0.03 mm (0.0012 in) Cz , C3 0.04 mm (0.0016 in) C4 0.05 mm (0.0020 in) @ 80 mm (3.2 in) ® 99 mm (3.9 in) 2. Measure: • Small end free play Use a dial gauge. Out of specification -t Replace the defective parts. Small end free play: 0.8 ... 1.0 mm (0.031 ... 0.039 in) 3. Measure: • Big end side clearance Use a feeler gauge. Out of specification -t Replace the defective parts. Big end side clearance: 0.25 ... 0.75 mm (0.010 ... 0.030 in) 4. Inspect: • Crankshaft bearing ill Pitting/Damage -t Replace.
• Stopper ring ® Bend/Damage -t Replace. • Crankshaft oil seals @ Wear/Damage -t Replace. Lubricate the bearing immediately after examining them to prevent rust. 5-10 http://ReadManuals.com