Yamaha Exciter II-570 — Primary Sheave and Drive V-Belt

I POTWRRI~ I PRIMARY SHEAVE AND DRIVE V-BELT VUH --------------------------------------------------------- 5. Install: • Weight and roller Installing steps: • Tighten the bolt CD . Bolt: 6 Nm (0.6 m • kg, 4.3 ft • Ib) Set screw: 4 Nm (0.4 m • kg, 2,9 ft· Ib) NOTE: _____________________________ ___ To maintain the balance of primary sheave, the bolt CD must be installed with their threaded portions pointing in a counter clockwise direc- tion, as illustation. 6. Lubricate: Weight (roller contact surface) (with thin coat) I'§rl Molybdenum disulfide grease • Primary sheave spring CD • Primary sheave cap ® NOTE: ________________________________ __ 7. Install:

Be sure the sheave cap match mark "x" is aligned with the spider match mark "X". 8. Tighten: Primary sheave cap bolt: 14 Nm (1.4 m· kg, 10 ft ·Ib) 4-8 http://ReadManuals.com