. MAINTENANCE OUTLINE OF SERVICE KOWA Analysis Items Measurement of density of metal wear particles This uses an ICP (Inductively Coupled Plasma) analyzer to measure the density of iron, copper, and other metal wear particles in the oil. Measurement of quantity of particles This uses a particle quantifier index measurement machine to measure the quantity of iron particles of 5 µ or more, enabling early detection of failures. 4 - 5 If the coolant level is low, it will cause overheating, and will also cause problems with corrosion due to air entering the coolant. Grease oints. y conditions.
Always use the recommended grease and Grease is used to prevent seizure and noises at the j This construction equipment is used under heavy-dut nd follow the change intervals and recommended ambie Manual. nt temperatures given in this Operation and Maintenance re nipples for overhaul, so they do not need grease. , add grease. t when greasing. The nipples not included in the maintenance section a If any part becomes stiff after being used for long time Always wipe off all of the old grease that is pushed ou Be particularly careful to wipe off the old grease in pla wear of the rotating parts.
ces where sand or dirt sticking in the grease would cause Carrying Out KOWA (Komatsu Oil Wear Analysis ) The oil clinic samples the oil periodically and analyzes it. This is a preventive maintenance service, which provides early discovery of abnormal parts and wear of the drive p arts of the machine. This then makes it possible to ensure prevention of failures and reduction in downtime. Komatsu's long years of experience and rich supply of a ccumulated data make it possible to accurately determine the condition of your machine. This enables us to locate t he problems and to recommend suitable and timely repair methods.
The oil clinic charges the customer only the actual cost s, and provides an immediate report of the results of the the analysis and recommendationsfor action to take. This lo w-cost service can save you high costs and inconvenience in the future, so we strongly recommend you to avail yo urself of this service. Others Measurements are made of items such as the ratio of fuel in the oil, and dynamic viscosity, enabling a highl water in the oil, density of the antifreeze coolant, ratio of y precise diagnosis of the machine's health.