. MAINTENANCE OUTLINE OF SERVICE Oil Sampling 4 - 6 Every 500 hours: En gine and components othe r than engi Precautions when sa Make sure that the oil is well mixed before s Perform sampling at regular fixed intervals. Do not perform sa mpling on rainy or windy d ays when water o r dust c an get i nto th e oil. For f urther details of KO WA, please contact your Komatsu di stributo Oil and Fuel Storage Keep indoors to prev ent any water, dirt, or othe r impurities from g etting in When keeping drum c ans for a long period, put t he drum on its side so that the fille r port of the drum s is at the side to prevent moisture fr om being sucked in.
If drums have to be s tored outside, cover them with a waterproof sheet or take o ther m easures to protect them. To prevent any chang e in quality during long-ter m storage, be sur e to use in the o rder o f first in - fir st out (use the oldest oil or fuel first). Filters Filters are extremely important safety parts. They prevent impurities in the fuel and air circuits from entering and causing problems. iodically. For details, see the Operation and Maintenance Manual. important equipment Replace all filters per iodically.
For details, see t he Operati on and Maintenance Manua However, when work ing in severe conditions, r eplace the f ilters a t shorter intervals ac cording to t he oil and fuel (sulfur content) being used. filters (cartridge type) and use them again. Always replace with new filters. Never try to clean the filters (cartridge type) an d use them again. Always replac e with new f ilters. When replacing oil filt ers, check if any metal part icles are att ached to the ol d filter. If any meta l parti cles are found, contact your Komats u distributor. spare filters until just before they are to be used. genuine filters.
Do not open packs of spare filters until just bef ore they are to be Always use Komatsu circuits from entering