Freightliner FLD Conventional — FLD Conventional

Transmissions 15-Speed RT, RTO, and RTX Models 2. Use the clutch brake to stop gear rotation when shifting into low-low, low-1st (whichever is used as a starting ratio) or reverse, when the vehicle is stationary. The clutch brake is actuated by de- pressing the clutch pedal all the way to the floor. Eaton Fuller 15-speed RT, RTO, and RTX model transmissions have a 5-speed front section, and a 2-speed rear, range section. They also have five ad- ditional deep reduction ratios. The 5-speed front sec- tion, and the low- and high-range sections provide ten evenly and progressively spaced forward speeds.

The five deep reduction ratios are also evenly and progressively spaced; however, they do overlap the low-range ratios, and should be used only when op- erating under adverse conditions. See Fig. 8.7 for the shift patterns, noting that the 4th/9th, and the 5th/ 10th shift positions in the RT (direct ratio) and RTX (overdrive ratio) transmissions are directly opposite in the RTO (overdrive ratio) transmissions. For normal upshifts and downshifts, only a partial disengagement of the clutch is necessary to break engine torque. 3. Use double-clutching between all upshifts and downshifts. 4. Never move the shift lever into low gear while in high range. 5.

Do not preselect with the deep reduction button. When making the shift from a deep reduction ratio to a low-range ratio, move the deep reduc- tion button from a forward position to a rearward position, then complete the shift immediately. Operation, Deep-Reduction IMPORTANT: The shifter knob has an interlock feature that prevents the deep reduction button from being moved forward when the range pre- selection lever is up (in high range). When in low range and the deep reduction button is in the forward position, the range preselection lever cannot be moved up. 6. Never move the deep reduction button from a rearward position to a forward position when the transmission is in high range. 7.

Do not shift from high range to low range at high vehicle speeds. 8. Do not make range shifts with the vehicle moving in reverse gear. 1. For all driving conditions, use the highest gear that is still low enough to start the vehicle moving with the engine idling, and without slipping the clutch excessively. 9. Never attempt to move the range preselection lever with the gear shift lever in neutral while the A B 10 8 9 1 7 10 R Lo Hi DR DR Lo 2 2 DR Lo 7 9 4 4 6 7 R Lo Hi DR DR Lo DR Lo 2 2 5 5 5 4 4 N N 5 3 2 2 6 8 10 4 3 1 5 6 8 9 1 1 3 3 5 5 DR Lo DR Lo DR Lo 2 1 3 6 7 1 1 3 3 4 4 DR Lo DR Lo DR Lo 03/13/96 f260045a A. Eaton Fuller RT and RTX transmissions shift pattern B.

Eaton Fuller RTO transmissions shift pattern 1. High Range 2. Low Range 3. Deep Reduction 4. High Range 5. Low Range 6. Forward for IN 7. Rearward for OUT Fig. 8.7, Eaton Fuller 15-Speed RT, RTO and RTX Model Transmissions Shift Patterns 8.8