Freightliner FLD Conventional — FLD Conventional

Transmissions clutch pedal, and move the shift lever into neu- tral. 8. Release the clutch pedal, and let the engine slow until the road speed and engine RPM match. 4. Release the clutch, and allow the engine to de- celerate until the road speed and the engine RPM match. 9. Partially depress the clutch pedal, and move the shift lever into the lowest gear in the high range- 5th gear in 9-speed models, 6th gear in 10- speed models. 5. Partially depress the clutch pedal, and move the shift lever into first gear. 10. Double clutch to continue upshifting. 6. Double clutch to continue upshifting until the top gear in the low range-4th gear in 9-speed models, 5th gear in 10-speed models.

See Table 8.3 . Downshifting 1. With the transmission in high range, shift pro- gressively downward to the bottom gear in high range-5th gear in 9-speed models, 6th gear in 10-speed models-double-clutching between shifts. See Table 8.3 . Meritor Shift Progressions MODEL LOW RANGE HIGH RANGE Off-Highway On-Highway 5 7 2. When in the bottom gear of the high-range shift pattern, and ready for the next downshift, push the range selection lever down into low range. Double-clutch through neutral, and shift into the top gear of the low-range shift pattern. As the shift lever passes through neutral, the transmis- sion will automatically shift from high range to low range.

9-Speed Standard R 1 3 R 1 3 R LOW 2 f260322 4 2 f260323 4 6 8 f260324 R 2 4 R 2 4 R 6 8 9-Speed "R" Ratio 1 3 1 3 5 7 9 3. With the transmission in low range, downshift through the low range gears as conditions re- quire. f260325 f260325 5 f260326 8 9-Speed RMO Models R 1 4 R 1 4 R IMPORTANT: Never use the clutch brake when downshifting, or as a brake to slow the vehicle. 3 LOW 2 f260327 3 LOW 2 f260327 6 7 f260328 R 2 4 R 2 4 R 7 9 Meritor Splitter and Range- Shift Models 10-Speed Standard 1 3 5 1 3 5 6 8 10 f260329 f260329 7 f260330 10 Refer to the Meritor website for additional informa- tion, www.arvinmeritor.com.

10-Speed RMO Models R 2 5 R 2 5 R 1 3 f260331 4 1 3 f260331 4 6 8 9 f260332 General Information, Meritor Splitter and Range-Shift Table 8.3, Meritor Shift Progressions 7. To upshift into high range—with the transmission still in the highest low-range gear—move the range selector lever up to put the transmission into high range, then partially depress the clutch pedal and move the shift lever into neutral. As the shift lever passes through neutral, the trans- mission will automatically shift from low range to high range.

Combination splitter and range-shift transmissions allow the choice of two splitter ratios in each lever position as well as the additional ratios provided in each lever position after shifting to the other range. IMPORTANT: Not all lever positions are used in each range and the shift patterns vary between transmissions. Be sure to read the shift pattern decal on the dash for the operating instructions for the specific transmission installed in your vehicle. 8.18