Freightliner FLD Conventional — FLD Conventional

Fifth Wheels and Trailer Couplings 1 The Fontaine fifth wheel lock mechanism for the trailer kingpin consists of a spring-loaded jaw and a sliding wedge. The jaw and wedge each have a pin permanently attached. The pin on the jaw and the pin on the wedge fit into elongated notches in the lock control handle. The notches in the handle control the limit of movement for both the jaw and wedge. The notches are arranged so that the wedge is actuated first dur- ing release of the kingpin. During lockup, the jaw is moved first with the spring- loaded wedge being allowed to slip in place against the jaw. A timing bracket ensures that the wedge and jaw are moved at the proper time.

2 Placing the lock control handle in the unlocked posi- tion moves the wedge away from the jaw. This action unlocks the jaw so that it can be moved by the trailer kingpin. When the tractor is moved out from under the trailer, the kingpin moves the jaw until the kingpin is out of the mechanism. With the jaw in the un- locked position, the lock control handle will remain in the unlocked position until manually moved by the operator. 07/25/95 f310190 1. Locking Wedge 2. Sliding Release Pull Handle Fig. 10.17, Manual Release Sliding Fifth Wheel Mount, MWS Model Fifth Wheel Lock Mechanism for Trailer Kingpin (See Fig. 10.18) During coupling ( Fig.

10.18 ), the motion of the king- pin entering the jaw will actuate the jaw and wedge. The jaw will move behind the kingpin, followed by the wedge. The purpose of the wedge is to reinforce the jaw and take up slack around the pin. Any wear on the jaw is immediately taken up by the wedge so there is no slack in the connection. 2 A 1 Fifth Wheel Locking Operation Locking the Fifth Wheel Lock Mechanism 3 CAUTION B C Before attempting to lock or unlock the fifth wheel lock mechanism of a sliding type fifth wheel, the slide locking handle, if so equipped, and the slide lockpins must be in the locked po- sition (fully inserted in the slider rail holes).

This prevents the sliding member from moving rapidly to the far forward or rearward position, which could damage the fifth wheel member or kingpin. 01/04/95 f310184c A. Unlocked Position B. Locking C. Locked 1. Wedge 2. Jaw 3. Trailer Kingpin 1. Chock the front and rear of the trailer tires to prevent the trailer from moving. Fig. 10.18, Fontaine Kingpin Lock Mechanism 10.13