Freightliner FLD Conventional — FLD Conventional

Engines and Clutches at any surface or material that will melt, burn, or ex- plode. See Fig. 7.1 . Diesel particulate filter servicing must be performed by an authorized technician, and a record must be maintained for warranty purposes. The record must include: date of cleaning or replacement; vehicle mileage; particulate filter part number and serial number. 09/25/2006 f610816a Fig. 7.1, High Exhaust System Temperature (HEST) Lamp WARNING Active regeneration can occur automatically any time the vehicle is moving. The exhaust gas tem- perature could reach 1500°F (800°C), which is hot enough to ignite or melt common materials, and to burn people.

The exhaust can remain hot after the vehicle has stopped moving. 09/25/2006 f610814a Fig. 7.3, Malfunction Indicator Lamp (MIL) The request/inhibit regen switch ( Fig. 7.4 ), located on the dash, may have three selectable positions: request regeneration; A solid yellow diesel particulate filter (DPF) lamp indi- cates that a parked regen is required soon, and should be scheduled for the earliest convenient time. See Fig. 7.2 . A blinking yellow DPF lamp indicates that a parked regen is required immediately, or an engine derate may occur. default (can include appropriate normal state condition—either in an automatic regeneration or inhibit state); inhibit regeneration. NOTE:

The regen switch can start an active regen only when at least one of two conditions exists: either the DPF light is lit, or the engine software calls for it. If neither of those conditions exist, the regen switch cannot cause a regen- eration to happen. The function of the switch will vary by the engine make and model in the vehicle. See the engine op- eration manual for switch operation details. Engine Starting 09/25/2006 f610815a For cold-weather starting, refer to "Ether Start Sys- tem" in this chapter. Fig. 7.2, Diesel Particulate Filter (DPF) Status Lamp A solid yellow malfunction indicator lamp (MIL) indi- cates an engine fault that affects the emissions. See Fig. 7.3 . 7.2