Engines and Clutches 3.1 If the ON/OFF switch on the instrument control panel is in the OFF position, flip it to ON. 3.2 Momentarily move the SET/RESUME switch on the instrument control panel to RESUME, or push the RESUME button on the transmission shift knob. Cruise will return to the last speed selected. To adjust cruise speed up or down, hold the SET/RESUME switch on the instru- ment control panel at SET to accelerate or at RESUME to decelerate until the desired speed is reached, or press the SET button on the transmission shift knob to acceler- ate or the RESUME button to decelerate until the desired speed is reached. 05/23/95 f260316 Fig.
7.6, Transmission Shift Knob Buttons loss of vehicle control, possibly resulting in per- sonal injury or property damage. NOTE: The resume-vehicle-speed memory is not maintained if the ignition is shut off. CAUTION BrakeSaver, Optional The BrakeSaver (optional on C-15 engines) permits the operator to control the speed reduction of the vehicle on grades, curves, or anytime speed reduc- tion is necessary but long applications of the service brakes are not desired. Do not attempt to shift gears without using the clutch pedal when the cruise control is engaged.
Failure to follow this precaution will result in a temporarily uncontrolled increase in engine speed; transmission damage and gear stripping could result. During downhill operation, the crankshaft is turned by the rear wheels (through the drivetrain). To reduce the speed of the vehicle, an application of braking force can be made to the crankshaft. The Brake- Saver does this by converting rotation energy into heat which is removed by the engine cooling system. The BrakeSaver is controlled by the driver, as neces- sary, by operating a lever on the instrument panel. Brake pressure increases as the lever is moved to- ward the ON position.
An air pressure gauge pro- vides a relative indication of the braking force. An oil temperature gauge indicates the heat in the Brake- Saver during its operation. If the temperature gauge indicates HOT, the BrakeSaver control lever must be moved to the OFF position. The oil temperature will decrease rapidly with the BrakeSaver off. When the temperature reaches normal, the BrakeSaver can be used. 1. To cruise at a particular speed: 1.1 Flip the ON/OFF switch on the instrument control panel to ON. 1.2 Hold the throttle pedal until the speedom- eter indicates the desired speed.
1.3 Momentarily move the SET/RESUME switch on the instrument control panel to SET or push the SET button on the trans- mission shift knob. 2. To disengage the cruise control: 2.1 Depress the brake pedal, or clutch pedal, or 2.2 Flip the ON/OFF switch on the instrument control panel to OFF or push the PAUSE button on the transmission shift knob. 3. To resume a preselected cruise speed: CAUTION Do not engage the BrakeSaver and control the wheel speed with the accelerator. The design of 7.10