1 page 1 3-17-2 ENGINE Models J08C-TP and J08C-TR 3. INSTALL THE FAN CLUTCH WITH COOLING FAN. Tightening torque: 560 kg·cm (41 lb·ft) SM3-J620 Fig. 4 4. INSTALL THE ALTERNATOR AND V-BELT. 1. Attach the alternator provisionally and install the V-belt. 2. Apply a load of about 10 kg (22 lb) by pressing the center point of V-belt and adjust the V-belt deflec- tion so it is within the standard value. Standard: 8 - 10 mm (0.317 - 0.394 in.) Special tool: V-belt tension gauge (09444 - 1210) 3. Tighten the V-belt adjusting bolt. 4. Tighten the through bolt. SM3-J619A Fig. 5 (EXAMPLE) CENTER POINT Fig. 6 SM3-J748 5. INSTALL THE FAN SHROUD. NOTE:
When installing the fan shroud, the tip clearance for the whole circle must be within the standard value. Standard: 5 mm (0.2 in.) Fig. 7 SM3-J739 6. INSTALL THE EXHAUST MANIFOLD. 1. Install the exhaust manifold gasket so that the black side faces the exhaust manifold. NOTE: Be sure to use new exhaust manifold gaskets. SM3-J107 BLACK SIDE Fig. 8